TI-OR07 Common Mode Choke Inductors Customizated 12mm Toroidal Magnetic Inductor

What is an inductor

The inductor consists of a coil of conducting material- insulated copper wrapped around a core of a ferrimagnetic material which is called an "iron core" inductor.

An inductor is characterized by its inductance, which is the ratio of voltage to the rate of change of current.

Product Features:

1.The inductance and wire spec will be customermized due to your requirement.

2.Magnetic Coil:12mm

3.Good thermal stability.

4.High operation frequency.

5.Low magnetic leakage.

6.Low DC resistance & Low loss.

7.High saturation materal & high efficiency.

8.Excellent current choking performance.

9.RoHS Complaint

Application of inductors

Inductors are widely used in analog circuits and signal processing. Applications range from the use of large inductors in power supplies, which along with filter capacitors remove multiples of the mains frequency of the DC output (or the switching frequency of a switch-mode power supply), to small inductors of ferrite beads or toris installed around the cable to prevent radio frequency interference in transmission along the wire.In many switching power supplies, the inductor acts as an energy storage device to produce DC current. The inductor powers the circuit, keeps the current flowing during the "off" switch, and makes possible a topology in which the output voltage is higher than the input voltage.

Dongguan SANNI Electronics Technology Co., Ltd. is a manufacturer who' s professional in design,manufacture and sales of potentiometer , encoder, band switch and other electronic components.

We always put customer's requirements as the first priority, dedicate to satisfy customer's needs. We provide the best support on the research and development on customer's new projects, support the overall plan for customer's requirements, and have helped customers to solve many professional difficulties.

We have design and prototype basis in Dongguan which near to Humen High Speed Railway Station, with 10+ experienced design and prototype engineers. Also set up automation center to make precision, quick turn and high volume production to meet customer's needs. 

Another manufacture center in Neijiang Sichuan where close to Chongqing airport and Yangzi River wharf. There are over 10 production lines with 100+ experience and diligent workers.